HOME >> Mechanical Industry >> Plastic Machinery
first prev 1 2 3 4 5 6 7 8 9 10 next last

    • PVC board plastic machinery

      1. The screw uses the special mixture function and the high plastic ability design to guarantee the plastic to melt and the color even extruding volume to increase. The clothes rack die head uses the special double-throttle design, which makes the adjustment of plate thickness more precise. 2. The temperature control ±1℃ may control the plasticizing process and the plate’s thickness and smoothness accurately. 3. The stick formation presses stick salty uses the level or perpendicular way of lifting, and this flexible lifting way provides more selections in the thick and thin plate operating process, all that has enhanced the quality of plate. The control plate thick uses the two-way adjustment of the screw and oil pressure roller, so we can control plate thickness in an accurate way. 4. The diameter of the stick presses wheel is 350mm, the double return circuit cooling system, together with mold temperature coordinating machine controls the temperature of the wheel accurately to cause the plate thickness to be even. 5. Sheet-cutting machine, length and quantity of plate are fine. 6. The roll receipt device uses the high-level torque motor and four axis automatic tension control, so it can adjust speed and roll tension to achieve the goal of thin plate rolled and received smoothly. 7. Equipped with the Strip breakdown equipment, it may freely Set the product width, and with meter-counter equipment, it can set the product length automatically.

      • plastic extruder plastic machinery

    • PVC Calender machine set

      Application scope: The unit is mainly used for Plastic products plant to produce transparency, color PVC rigid film, PVC film and other calendered products. Structure and characteristics: 1. Specifications of the calender’s five rolls are all the drilling structure ofΦ300x900mm. 2.4# and 5# roll is Steel Electroplating mirror roll. 3. Pitch adjustment of Roll is all electric adjustable. 4. The main motor is driven by a 22KW Frequency Motor, and its main electrical components are imported from Japan. 5. Gear box is middle-hardened combination gearbox. Its rotating accuracy is eight. 6. The unit is equipped with two automatic temperature-control heat petrol stations. 7. There is Φ120x900x3mm or Φ120x900x5mm auxiliary stripping roller and all of them are cascaded in calendar waiting for universal joints transmission. 1#, 3#, 5# are lifted one by one. 8.Φ240x900x10mm Cooling rollers is installed in orbit in rank of level, and they can move foreword and backward flexibly. 9. Coiling machine from the center operates through two 0.6 kilograms torque motors drive two steam rising axis separately. 10. Production capacity: products width≤750mm, thickness 0.08-0.5mm,monthly output 120-150T. Main specification and parameter: Bowl specification: φ300x900mm Bowl arrangement form: L Fixed roller speed: 18/28 m/min Lubrication form: Focus lubricating method Heating form of the bow: Heating by oil

      • plastic machinery plastic extruder

    • PVC cushion production line

      The plastic profile pad produced by the unit is extruded by PVC resin for once-formation. The products have the characteristics of soft, age-resisting, easy-to-clean and convenient to pave. It is widely used as non-slip pad in the hotel, family, cabaret, airport and bathroom and as pad for the elevator and before the door. In a word, it is widely used in populous passages. Product Width 1220mm Output 60~80M Power 140KW

      • plastic extruder plastic machinery

    • PVC fiber reinforcing Pipe production line plastic machinery

      This set is used for producing the inner and outer PVC flexible pipe, which is reinforced and transparentized by using reticular terylene fiber in the middle as its reinforcing layer. This kind of pipe is widely used in conveying of pressed or corrosive gas or liquid. Absorbing the advanced technology both in and out of broad, the quality of the set and its products have been more advanced compared with the same industry all over the country. PVC material reinforcing pipe is also called PVC reticular pipe, colloquially called plastic flexible conduit, which applies to conveying of pressed or corrosive gas or liquid. It is widely used in the industries of mechanism, coal mine. Petroleum, chemistry, agricultural irrigation, constructions and civil use (solar water heater, gas cylinder) etc. Type:45/30 65/30

      • plastic extruder plastic machinery

    • PVC Foaming Shape Molding Production Line

      This unit is a new-generation extruding equipment produced by us introducing the international advanced technology. It is appliable to produce plastic door and window, plastic whole door board, stair rail, plastic board, decorative board and PVC foaming shape molding product and so on. It has the advantages of high accuracy, good plastification, long longevity, great ability of self cleaning. Assorted mainframe SJSZ80/156 SJ65/132 SJS51/105 Vacuum sizing platform SDZ-3200 SDT-90 SDT-65 Effective length of platform 3200 2800 1500 Vacuum pump power/KW 3x7.5 2x5.5 5.5 Traction machine model SXQ-210 SJG-200 SJG-200 drawing width/mm 300 300 300 Pedrail clamping length/mm 2700 1200 120 drawing speed/m.min-1 0.3-3 0.3-3 0.3-3 traction/KN 30 15 10 traction power/KW 2x1.5 2.2 1.5 drawing frequency conversion power/KW 3.7 - - model of sawing machine SYJ-220 QG-160 QG-160 cutting size/mm 220x60 220x60 220x60 diameter of saw blade/mm 400-500 400 400 cutting power/KW 1.1 1.1 1.1 model of cutting automatically air-actuated automatically air-actuated automatically air-actuated unit weight/kg 8000 7000 6000 outside size/mm(length x width x height) 16x2.2x2.9 16x2.2x2.9 14x1.9x2.9

      • plastic machinery plastic extruder

    • PVC pipe production line plastic machinery

      ZJF series plastic pipe production line mainly applies to the aspects of agricultural drainage, construction drainage and laying cable etc .It also can be used to produce PVC plastic pipe of various calibers and thicknesses of pipe wall. This production line consists of taper (parallel) double screw plastic extruder, vacuum calibrator, tractor, cutting machine and unloading machine. The screw plastic extruder and tractor adopt the imported A.C.frequency control set. Both vacuum pump and pulling motor use high quality products. The tractor has two-way, three-way, four -way and six-way type. The cutting machine has blade saw cutting and planetary cutting method. We also supply lineal measure instrument and incrassation set. The set has the advantage of reliable performance and high productivity. Our company can produce wall coil pipe, wall hollow pipe and sandwich layer foaming pipe line and we can also produce PP,PE,ABS.PP/R,PEX,silicon core pipe and pipes of other materials. Enjoying the advantages of convenient operation and stable performance, the planetary cutting machine adopts auto-numerical control by computer. It reaches the leading level internationally

      • plastic machinery plastic extruder

    • PVC profile production line plastic machinery

      The set is the professional manufacturing equipment for producing PVC profile. It mainly produces profiles for windows and doors, board, plate, micro foaming profile and micro foaming decorating board. Adopting and assimilating technologies of foreign countries, our company has developed the large-scale plastic profile production line for window and door. Corresponding with the taper double screw extruder, it has advantages of high automation, stable performance, high output and high efficiency.

      • plastic machinery plastic extruder

    • PVC steel wire reinforced pipe Units

      1、Use high-speed, high-efficiency extruder to ensure the plastics materials quality and production. 2、The special designed Wire Spring Coiling Machine makes passing the spring uniform and continuous production longer. 3、The pipe which is produced by the specially designed tube nose has the features of high transparency and uniform wire distribution with its length can be arbitrary. 4、The main electrical components of units adopt imported products to make operation stable and reliable 5、All the unit button using integrated design is easy and quick to operate. Product feature: Product is the PVC transparent hose embedded twisted steel wire frame, used in -10℃-＋65℃. It is light, transparent, good resistance to elements, small bent radius and good resistance to stress, can be widely used in food and health industry, is the ideal pipe of factory, agriculture and pump and convey water, sewage, oil and powder in project.

      • plastic machinery plastic extruder

    • PVC wave board, trapeziform board production line

      PVC wave board extrusion line can continuously produce colorful, weather-resistant, burning resistant UPVC plastic wave board, together with the SJSZ-60 22 conical twin-screw extruder and the corresponding wave board molding machine ,hauling engine and cutter. It can also produce the plastic flat board by changing some assembly. Besides it can produce PP.PC wave board by changing the mainframe. This unit has the characteristics of excellent plasticization, stable performance, compact structure, high automation and convenient operation. It is the ideal machine for the manufactures of constructions.

      • plastic machinery plastic extruder

    • PVC.PE perforated pipe production line

      The unit can choose the different main engines by the different materials. The PVC main engine uses the taper double- screw extruder to ensure the plastic effect, high speed and high pressure. The PE main engine uses efficient BM mixed polyethylene special-purpose screw to guarantee high speed, high efficiency and precise extruding. The perforated pipe nose (PVC, PE) which is specially designed by the material characteristic guarantee the high speed extruding stability and the tubing inner and outer wall bright and clean. The tractor uses the import frequency conversion velocity modulation, up and down drive type to achieve the big force of traction, at the result of satisfying the need of unit high speed production. Broad adoption scope: it can produce various three orifices to seven porous tubing, such as PVC, PE and PP. The characteristics of perforated pipes: 1. High resistance to compression and age-resisting. Using high-quality and improved PVC engineering plastics for once-extruding, it has the high strength figuration and the grids in the pipe are physical steel structure, which rigidity is 10-100times than the custom plastic pipe. There is no need to make the base or envelop in normal conditions. It can replace the steel pipe to traverse the road safely. Smolder, anticorrosion age-resisting and the service life can reach to50years 2 complete specifications and various combinations. Specifications of the products are 3orifices, 4orifices, 5 orifices, 6 orifices and 7orifices etc.which can deposit cables of different calibers. It can also transit and fit together with the former concrete pipes and corrugated pipes freely. What′s more, it also equipped with corresponding auxiliaries such as tie-in, end cap, tightening belt special glue water and mending part etc,so that it is very convenient to construct and operate 3 Innotive structure and economical pipe position .The outer structure is radian and square. The configuration is trim and convenient. The pipe position that they occupies are small, which is 10%compared with concrete pipe position. The excavation is small so it can efficiently economize underground pipe position in cities; besides it pose little influence on traffic and city planning.

      • plastic machinery plastic extruder

    • SHR Mixed Unit SHR High-speed mixer (single)

      Usages and characteristics: Using for various plastic mixture, mixing, drying, coloring and other technology, is the ideal equipment of producing Profiles and pipes. The main spindle Sealed device has received national patents. The heat mixed implement has the function of self friction and electric heating and steam heating. The Cover used double-tight and Cold mixing used arch Cover is not easy deformation. It has the characteristics of compact structure and pleasing appearance and so on. Equipped with dust device. Blades pass the static and dynamic balance test.

      • plastic extruder plastic machinery

    • single-screw extruder plastic machinery

      Developed by Qingdao Fushun Plastic Machinery Co., Ltd, the series high performance single-screw extruder has absorbed the most advanced and latest technology of Europe. Screw uses the newest bi-separating technology and the feeding cover uses retrorse screw trough technology. This series high performance single-screw extruder has features as follows: High output extrusion Melting in low temperature Melting uniformly, good plasticization effect Wide application scope The unique straight or helical trough feeding cover and the unique design of screw ensure that material can be plasticized in low temperature and extruded rapidly.

      • plastic machinery plastic extruder

    • SWP plastic crusher

      The SWP series plastic breaker is a new series product which is successfully developed based on absorbing the domestic and foreign advanced technologies, in the light of the actual situation of China's Electrical and Mechanical support. It has the feature of reasonable structure, low noise, high efficiency, and compared with the domestic and foreign similar machine type, it can consume energy lowly, make the operating performance safe and steady, extremely suitable to apply for various oak models Reprocessing Industry The series produces apply for various rubber products, broken plastic, such as: pieces of plastic waste plot,, Profile, pipe, bar, plate, sheet, film, Propylene silk, polyester silk bubble membrane, theca, large hollow containers and scrap tires, rubber products and garbage, after broken the color and the quality can not be changed, their plastic pellets can directly use for extrusion and aids shoots.

      • plastic machinery plastic extruder

    • UPVC pipe production line plastic machinery

      Adopted Conical Double-Screw Plastic Extruder has high pressure and even plastics. Adopted Co-extrusion head makes pipe layered evenly, outside wall smooth as a mirror. Vacuum double stereotypes, spray cooling and with automatic temperature control and drainage function. Traction uses import frequency Control aircraft, three or four tracked crawler clamping, the force heavy and the pipe difficult to deform. Adopted planet Cutter and strong absorption litter distribution function. Production lines use imported PLC control system, easy to operate, and has high automation. Production line can be equipped with different nose, auxiliaries according to need to produce monolayer, Foam-core, spiral foam, air and air-walled spiral wall PVC pipe.

      • plastic machinery plastic extruder

    • Wood Plastic Board Production line plastic machinery

      SJXH-Wood plastic board, flooring production line. With specially designed screw, charging barrel, molder and techniques of processing, product of this unit is a new type of environmental product. After being extruded and molded in high temperature and high pressure condition, the wood plastic composite material produced by plastic and some abandoned wooden fiber combined proportionally with processing agent and foaming agent can be used to produce pallet, packaging carton, door board, frame of the door and window, decorative flooring and decorative line. It has stable plasticization, high output, long longevity and other advantages. Unit: it is made up of extruder, vacuum sizing machine, traction machine, cutting machine, stacker, etc. Electric uses alternating current frequency conversion, temperature controlling adopts high quality products so that it is convenient to maintain. After changing screw barrel molder, it can directly extrude simulated foaming molding product. Application: floor, ceiling, multifunctional decorative board, all kinds of lines, clapboard, double acting door and decorative lines. Advantages: fireproofing, damp proofing, inflaming retarding, high mechanicalness, great capacity of anticorrosion, acid-alkali resist, recyclable, no crack, no distortion, no swell, no pollution, no harmful social effects, no poison, and long longevity.

      • plastic machinery plastic extruder

    • wood-plastic kicking line plastic machinery

      Two functions of the kicking line: decoration and protection During the interior designing, inside corner line, belt line and kicking line play the role of ocular balance. Matching the linear feeling, material and color etc indoor can reach an excellent beautifying decorative effect. The other function of the kicking line is protective. Kicking line, just as its name implies, the area that feet can kick. Because of this, it is prone to be striked.Using kicking line can make the wall and the floor connect firmer, so that it can reduce wall deformation and avoiding the sabotage caused by outside force collision. Besides, the kicking line can be easily cleaned. It is very convenient to clean if there was sewage. The kicking line production line consists of plastic extruder, mold (sample as customer required).vacuum calibrating water tank, tractor, the cutting machine, pilling bin and electric controller. The products are smooth and beautiful Welcome to order home and aboard!

      • plastic machinery plastic extruder

    • XPS heat-preservation board production line plastic machinery

      XPS Polystyrene foam sheet extrusion, or extruded polystyrene board (XPS), has perfect honeycomb structure, its density, water absorption, thermal conductivity and vapor permeability coefficient are lower than other insulation material, hence it has good strength, lightweight, airtight, anti-corrosion, anti-aging, low prices, widely used in the insulation industry, highways, railways, airports, Square antifreeze insulation, home improvements and other fields, it is the best recognized insulation materials in the market Product Application Note Apply to steel plants, metal housing and color wave kilowatts for insulation Apply to prepare the freezer insulation panels for insulation and waterproof Use to pave below the roadbed for ground heave buffer and control; Apply to residential buildings, office buildings, Factory walls and roof waterproofing and insulation Use to pave below the floor for played-insulated, moisture-proof, sound-proof; Apply to central air-conditioning ventilation pipes for insulation, insulation effect

      • plastic machinery plastic extruder

    • Dowwell DWCA1-1 cartridge heater

      Electric heater, heating element, cartridge heater, We can supply various electrice heater as your needs With nearly 2 decades of presence in the industry for our factory, we are efficiently providing multiple solutions to the needs of electric heaters. We have a team of dedicated and talented engineers whose diligent efforts enable us to achieve the company's goal of 100% customer satisfaction. Pleae inquiry us with your accurate needs, we will try our best effort to cooperate with you and meet your requirements.

      • cartridge heater electric heater heating element

    • guosen press machine WPC machinery

      The main equipment hot press, cold press, stripping machine, crushing machine, mixer, etc. The production process: waste plastic and sawdust, straw, flax rod, cotton, under the handling of raw materials such as comminuted wood mixed with plastic to deal with high-speed hot mold plate, cold-pressing all kinds of stereotypes Demoulding size wood door, wood plastic template, plastic trays, plates and wood moisture products such as decorative panels. The product has the following advantages ① a wide array of sources of raw materials, integrated low cost, in the market competitiveness of a certain ② fairly basic performance and timber can be cut may be pitting, can be nailed, the performance of its products durable than wood and bamboo good template ③ flexible assembly products can be based on the market and change the specific requirements of users ④Repeat high rate of utilization of recyclable ⑤ not afraid of grave-sweepers, anti-acid, anti-aging and difficult to water, easy peeling and concrete.

      • WPC machinery Wood Plastic boards wpc production

    • SAPAC SAPAC double injection molding

      We, Shenzhen SAPAC Industry Co., Ltd., is one of the leading mold factory in China, and with nearly 7 years experiences in the fields of plastic mould manufacture, plastic part injection and electronic product production. We have always engaged in the development and production of automobile parts, IT products, and electronic products and so on. Because of the great quality and competitive prices, we have gotten a lot of good reputations from our clients all over the world. For more information about us, please visit our website. And your any reply will be highly appreciated.

      • double injection molding double injection mold double injection parts

first 1 2 3 4 5 6 7 8 9 10 last